Coilox Neutral Coil Cleaning Detergent - Heavy duty coil cleaning concentrate

Overview

• For light to moderate cleaning.
• No rinsing required.
• Cleans and deodorises to increase system efficiency. 
• Non-acidic and non-toxic.

Description

• Coilox is a concentrated coil cleaning product ideal for light to moderate cleaning.
• It effectively cleans dirty evaporator and chilled water coils in one easy step.
• Coilox is fast acting with no rinsing required, saving you time.
• Dirt and contaminants simply wash away with condensate.
• The thin detergent film that remains resists adherence of airborne particulates and other contaminants to maintain a clean coil and fin surface longer.
• If coils are heavily fouled a more heavy duty cleaning product is recommended. 

Directions of use

• MUST BE RINSED IF USED NEAT.
• Dilute 200mL of Coilox per 1L water.
• Turn system off.
• Spray coil thoroughly using a low pressure sprayer.
• Wait 5 minutes and resume normal operation.
• Generally, rinsing is not required as the foam is drawn through the coil dislodging dirt and contaminants, which will wash away with condensate.
• If the coil has a build-up of mould or fungi, it is recommended to schedule cleaning outside of hours of occupation as excessive mould and fungi can cause odour.

Pack Size - 5 Litres

Product Tips

• It is not recommended to use Coilox to clean heavily fouled coils as an odour may be omitted from the unit during the cleaning process.
• It is recommended if the coil is heavily fouled, to use an alternate HydroBalance product such as 4X.
• Refer to the MSDS for further information.

Safety Information

Avoid contact with skin and eyes. First Aid: For advice contact the Poisons Information Centre. Phone 131126 (Australia) or a doctor at once. If swallowed do NOT induce vomiting. If in eyes hold eyelids apart and flush the eye continuously with water until advised to stop by Poisons information centre or doctor. If contact with skin occurs, wash thoroughly.

Ricambi Appliance Spares is not liable for any damage resulting from incorrect selection or improper installation of spare parts.

All electrical components must be installed by a qualified electrician, and all technical products should be installed by a professional technician.

PCB returns will not be accepted once theseal is broken.

Errors and Omissions Disclaimer:

While we strive to ensure all information on this website is accurate and genuine, Ricambi accepts no responsibility for its use or for any potential infringements of patents or third-party rights that may occur.

Legal Disclaimer:

All trademarks, logos, and other representations are the property of their respective owners. The use of brand names, trademarks, or logos does not implythat RICAMBI is affiliated with or authorized by those brands, companies, or trademark holders.

RICAMBI does not claim ownership of any products or services provided by these companies.