One of the most common faults faced in industrial plants / HVAC installations, is overheating [PFR-03 Phase Failure and Sequence Monitoring Relay]  and possible damage of three phase motors due to phase failure. The typical "thermo-magnetic relay", which is a common method of motor protection, is generally too slow to provide adequate protection due to electromechanical make-up and the usual use of high current settings to assure normal operation without false tripping.Phase Failure: When the monitored 3 phase supply voltage is valid, the PFR-03 output relay is ON. Should any of the 3 phases fail, the output relay switches OFF immediately.

Phase Sequence: When the phase sequence is correct (R, S, T in clockwise direction) The PFR-03 output relay is ON, should the phases not be in the above sequence, the output relay will be switched OFF immediately.

Voltage Imbalance: Should the voltage of each phase not be the same then the PFR-03 output relay will switch OFF within 0.2 seconds.

Ricambi Appliance Spares is not liable for any damage resulting from incorrect selection or improper installation of spare parts.

All electrical components must be installed by a qualified electrician, and all technical products should be installed by a professional technician.

PCB returns will not be accepted once theseal is broken.

Errors and Omissions Disclaimer:

While we strive to ensure all information on this website is accurate and genuine, Ricambi accepts no responsibility for its use or for any potential infringements of patents or third-party rights that may occur.

Legal Disclaimer:

All trademarks, logos, and other representations are the property of their respective owners. The use of brand names, trademarks, or logos does not implythat RICAMBI is affiliated with or authorized by those brands, companies, or trademark holders.

RICAMBI does not claim ownership of any products or services provided by these companies.